| Looker® ID |
|
|
N/A
|
| Date of Observations |
|
|
11/2/2010 |
| Time of Observations |
|
|
3 PM |
| Location of Observations |
|
|
1234 NW 5th Street, , Anywhere, OK, 73104 |
| Reported name of person showing item (if given) |
|
|
Robert Jones |
| Working Demonstration |
|
|
I asked the seller, Mr. Jones, to demonstrate that the item is in basic working order. He plugged it in, and turned it on. It powered up and the LCD screen on the right side of the front of the plotter came on. He printed what he called a “demo plot” or a “diagnostic test plot.” He did this on what he called a “cut sheet plot” using individual sheets of paper and again on a “roll plot” using paper from a roll. Photos of the test plots are attached. The plotter is on rollers and the seller demonstrated that the rollers function normally. |
| Brand as shown on item |
|
|
Hewlett Packard |
| Manufacturer as shown on item |
|
|
None listed, but the label on back does say “Made in Singapore” |
| Serial number as shown on item |
|
|
SG7BL48992 |
| VIN number as shown on item |
|
|
n/a |
| Other markings on item or item label(s) |
|
|
“Model C6075A”; “100-240V”; “Current Max 3A”; “Frequency Range 50-60 Hz”; “Power Max 200W”; “Adobe Postscript 3” plus more, some not in English (see photos) |
| General Cosmetic Condition |
|
|
The legs and base had quite a lot of visible dust on them but I saw no obvious dents, scratches or other significant cosmetic defects. |
| Model number |
| | Model C6075A |
| Measurements | | | approximately 61 inches wide at the top, which is the widest point; 50 inches Tall/High; 27 inches deep front to back at the deepest point |
| Additional Comments |
|
|
The plotter was in a room containing several other plotters and other similar equipment. |